Friday, December 9, 2011
How hard is it to take the transmission off of a 93 Camaro Z28?
I'm having some transmission problems and have experience in replacing clutches and motors, just not with Camaro's. I'm wondering how hard it is to take the tranny off to check the torque converter? I know the motor rides up under neath the dash board and replacing the spark plugs is crazy hard, but what about the transmission? Thanks.|||calls for about 6 hours will take you about 10 to 12 take your time and be sure vehicle has jack stands under it safety first unhook battery,remove driveshaft,put drain pan under end of trannie,to catch fluid, remove tourque convertor cover and remove tourque convertor bolt or nuts, put good jack under trans pan put a little pressure on trannie,remove trans mount bolts or nuts,remove transmission lines,then remove crossmember,let trannie down some to access trannie bolts remove all of them be very careful not to drop trans on yourself just the basic how to good luck hope this helps|||Use a wrench and hammer.|||Dude, if you have trouble replacing spark plugs, don't mess with your tranny.|||They arent bad, If you can get them high enough to work under them. loosen the rear tranny brace and you can lower the angle of the tranny and motor. this gives you more room to work. However, visually you will not be able to tell if there is a prob w/ the torque convertor. You can check it by driving up a hill in a higher gear before it downshifts. you will feel it shutter. Good luck!!
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment